Return to site

Um2 Drivers Windows 10

broken image


  • Driver Lenovo Ideapad Flex 10 Wifi Windows 7 64bit. That s why we re kicking it up a notch with the amazing UM2, an ultra-compact 2 x 2, 48 kHz USB interface with a studio-grade XENYX Mic Preamp, combination XLR/TRS input for your vocal and direct instrument input no DI required and an additional. 48 V phantom power, Guitar input, Signal.
  • It is hardly any work to update the drivers and you will not even need to test the drivers since windows 7/8/10 are basically the same os when it comes to drivers (the same might be true for OSX. But i dont own one so i cant say anything about that).

In this video we do the Behringer setup and install the driver on Windows 10. Check out our Behringer UM2 Audio Interface Video Playlist here bit.ly/2q6jfLV-BehringerUM2-Playlist

The version and build of Windows 10 that you're using on your device. Windows 10, version 1703 (OS Build 15063.608) But again, it seems to be more an issue with Windows recognizing the installed driver. When I go to device manager, the driver seems to be installed. When I click update driver it correctly reports that I have the newest version.

If you would like to see more videos on the Behringer UM2 Audio interface please subscribe to the channel. www.youtube.com/simplegreentech?sub_confirmation=1

Here are the links to the Behringer Drivers directly from the Behringer site:

► 64 bit drivers: bit.ly/2ptlNTY-Behringer-64bit

► 32 bit drivers: bit.ly/2xCNP3a-Behringer-32bit

*******************************************************************

Links to gear used to make this Behringer UM2 video:

BEHRINGER UM2 AUDIO INTERFACE ⇩⇩⇩⇩
► (US AMAZON) amzn.to/2QbdqeO
► (CDN AMAZON) amzn.to/2GLurqB

BEHRINGER XM8500 MICROPHONE ⇩⇩⇩⇩
► (US AMAZON) amzn.to/2RYuods
► (CDN AMAZON) amzn.to/2TREmPn

AMAZON BASICS XLR CABLE ⇩⇩⇩⇩
► (US AMAZON) amzn.to/2Qe3WPI
► (CDN AMAZON) amzn.to/2BEyQID

NEEWER ADJUSTABLE MIC ARM ⇩⇩⇩⇩
► (US AMAZON) amzn.to/2S51DvB
► (CDN AMAZON) amzn.to/2BFHQx4

MACKIE CR3 STUDIO MONITORS ⇩⇩⇩⇩
► (US AMAZON) amzn.to/2S2OCTg
► (CDN AMAZON) amzn.to/2EbLUXM

Um2 Drivers Windows 10

VEGAS PRO EDIT SOFTWARE ⇩⇩⇩⇩
► (MAGIX WEBSITE) bit.ly/Magix-Vegas-Pro365

*******************************************************************

Windows
Um2 Drivers Windows 10

If you found this video helpful and would like to see more, or show us your appreciation, please consider becoming a member on our patreon page www.patreon.com/SimpleGreenTech.

*******************************************************************

Social Accounts
► Youtube www.youtube.com/simplegreentech?sub_confirmation=1

► Twitter www.twitter.com/SimpleGTech

► Instagram www.instagram.com/simplegreentech/

► Facebook www.facebook.com/simplegreentech/

or visit our blog site at www.simplegreenmedia.com/wp/

*******************************************************************

Drivers

DISCLAIMER: Some of the links in the description are affiliate links. If you use the product links, I may receive a small commission. Thank you.

About this video
In this video Radio Zane of Simple Green Tech installs the actual Behringer drivers on windows 10 for the Behringer UM2 USB audio interface. The Behringer UM2 Windows 10 Drivers also work on Windows 7. We really like this affordable audio interface it gives you great recording quality like any other Behringer audio interface would. We hope you enjoyed our review of this Behringer Audio Interface and continue to enjoy your Behringer U Phoria UM2.

Page 1 of 1
  • Posts: 1
  • Offline
    • Posts : 1
    • Joined : Tue Sep 10, 2019 7:32 pm
    • Has thanked: 0 time
    • Been thanked: 0 time
Is there a compatible USB interface for the Behringer (U-Phoria UMC22 in particular) or do we have to use PreSonus interfaces strictly? ASIO4ALL is the recommended driver but I know that is NOT the way to go. I have downloaded all of the PreSonus drivers and Studio 1 kicks them out when I try to switch to them. Thanks for the advice, one way or the other!
BTW, I have checked to have my signature 'gear' attached but it doesn't show in the preview . . . I'll add if necessary later.
Mike Frandson
Studio One Artist version: 4.5.3.53866
HP 6300 Core i5-3570 3.4 ghz, 16G Ram, 64-bit
Windows 10 Pro build 18362.356
  • Posts: 28
  • Offline
    • Posts : 28
    • Joined : Sat Oct 07, 2017 9:40 am
    • Has thanked: 0 time
    • Been thanked:4 times
Here is some information that may be helpful on setting up the Behringer interfaces.
Download & Install Driver Software
After registration, the next step is to download and install the required PC (Windows) driver. A driver isn't necessary on a Mac OS because Behringer interfaces are class compliant and do not need additional software to connect. Follow the steps below to install the required driver software for Windows.
Download & Install Behringer Audio Interface Drivers
1. Visit Behringer's Audio Interface page and select your product.
2. Click the Downloads tab and scroll down to Drivers. Click the latest available driver to start the download.
3. Open your Downloads folder, extract the .zip file, and run the .exe installer. Restart your computer after the installation completes.
Do I need to use the ASIO4All driver?
Although most Behringer audio interfaces have their own driver (version 4.38 as of July 2018), some of the smaller interfaces will require the third-party driver, ASIO4All. These interfaces include the UMC22, UM2, UCA222, and UCA202. Check out our ASIO4All setup guide for instructions on how to install and configure it.
  • Posts: 976
  • Offline
    • Posts : 976
    • Joined : Tue Jul 01, 2014 3:08 pm
    • Has thanked:28 times
    • Been thanked:57 times
I've checked with my contacts and the umc22 does not have an official asio driver from behringer.
You could perhaps try the generic low-latency driver from steinberg to see if that helps...?
Behringer Wing, iMac late 2015, Behringer X-Touch, X-Touch ONE, M-Air mr18, X-Air xr18, x32 with Dante/aes67, x32-rack with Dante/aes67, s16 and sd16 stageboxes, p16 monitor system, TurboSound iQ-speakers, Waves x-wsg with SoundGrid server, Motör 61, BCR-2000, StudioLive 24, FirePod 10, Apogee Ensemble, Alesis HD24, Studio One Pro v5, Notion 6, NI Komplete 11 Ultimate, Halion 6, Nuendo 10, Ableton Live 8 Suite, Reaper 4, misc Line6 gear/software, True Temperament Frets on basses and guitars, Korg Kronos, Roland vk-7, Behringer Deepmind 12, Behringer Neutron, Yamaha 02r.....
  • Posts: 102
  • Offline
    • Posts : 102
    • Joined : Tue Nov 28, 2017 12:03 am
    • Location : Australia
    • Has thanked:24 times
    • Been thanked:13 times
Very dissapointing that any company releases an audio interface with no asio drivers.
If you are running Windows 10, definitely give wasapi driver mode a try if asio4all is unsatisfactory.
Studio One 4 Pro, Win 10, Asus ROG i7, 32 Gb Ram, SSD, RME Fireface UFX, X32, Atom, Faderport USB
  • Posts: 1540
  • Offline
    • Posts : 1540
    • Joined : Tue Jul 01, 2014 1:44 pm
    • Has thanked:1031 times
    • Been thanked:292 times
Try this and see if U can download drivers here : https://www.behringer.com/c/Behringer/D ... rans(en|en)
Moderator
Please add your specs to your SIGNATURE.
Search the STUDIO ONE 4 ONLINE MANUAL. Access your MY.PRESONUS account.
OVERVIEW of how to get your issue fixed or the steps to create a SUPPORT TICKET.
Needs to include: 1) One Sentence Description 2) Expected Results 3) Actual Results 4) Steps to Reproduce.

Windows 10 64bit Home, Mac Catalina, SO4.6.2 Pro, SO 5 Pro, LUNA, Cubase 10.5 Pro, SLIII32, 24.4.2, 16.0.2 FW, Quantum 2626, Faderport 8, Atom, Console 1+Fader 1, UA Apollo Twin TB/USB, Toontrack, NI Komplete 12, ++
  • Posts: 454
  • Offline
    • Posts : 454
    • Joined : Sat Jul 06, 2019 2:00 pm
    • Has thanked:1 time
    • Been thanked:87 times
I had very mixed results with a Behringer UCA222 and ASIO4ALL. It mostly worked except when it occasionally dropped out and needed re-plugging, and the ASIO Control Panel often disagreed with the settings in the DAW and changed on their own. I assumed this latter bit was normal until I got an interface with a 'proper' ASIO driver'. So it's cheap and cheerful and will mostly do the job but will occasionally annoy you! I've no regrets about replacing it with a more pricy Focusrite interface!
Studio One Pro 4, Intel i5-8400 @ 2.8GHz, 32GB RAM, Windows 10 Pro 64-bit
Focusrite Scarlett 8i6 (3rd Gen), Novation Launchkey Mini Mk3, Akai MPK Mini MKII, Novation Remote 25 (ancient, but not as ancient as I am)
Guitars, Mics, Synths, Upright Piano (tuned circa 2005), £50 drum kit, Wife (with Cello and Cello skills)
Behringer

VEGAS PRO EDIT SOFTWARE ⇩⇩⇩⇩
► (MAGIX WEBSITE) bit.ly/Magix-Vegas-Pro365

*******************************************************************

If you found this video helpful and would like to see more, or show us your appreciation, please consider becoming a member on our patreon page www.patreon.com/SimpleGreenTech.

*******************************************************************

Social Accounts
► Youtube www.youtube.com/simplegreentech?sub_confirmation=1

► Twitter www.twitter.com/SimpleGTech

► Instagram www.instagram.com/simplegreentech/

► Facebook www.facebook.com/simplegreentech/

or visit our blog site at www.simplegreenmedia.com/wp/

*******************************************************************

DISCLAIMER: Some of the links in the description are affiliate links. If you use the product links, I may receive a small commission. Thank you.

About this video
In this video Radio Zane of Simple Green Tech installs the actual Behringer drivers on windows 10 for the Behringer UM2 USB audio interface. The Behringer UM2 Windows 10 Drivers also work on Windows 7. We really like this affordable audio interface it gives you great recording quality like any other Behringer audio interface would. We hope you enjoyed our review of this Behringer Audio Interface and continue to enjoy your Behringer U Phoria UM2.

Page 1 of 1
  • Posts: 1
  • Offline
    • Posts : 1
    • Joined : Tue Sep 10, 2019 7:32 pm
    • Has thanked: 0 time
    • Been thanked: 0 time
Is there a compatible USB interface for the Behringer (U-Phoria UMC22 in particular) or do we have to use PreSonus interfaces strictly? ASIO4ALL is the recommended driver but I know that is NOT the way to go. I have downloaded all of the PreSonus drivers and Studio 1 kicks them out when I try to switch to them. Thanks for the advice, one way or the other!
BTW, I have checked to have my signature 'gear' attached but it doesn't show in the preview . . . I'll add if necessary later.
Mike Frandson
Studio One Artist version: 4.5.3.53866
HP 6300 Core i5-3570 3.4 ghz, 16G Ram, 64-bit
Windows 10 Pro build 18362.356
  • Posts: 28
  • Offline
    • Posts : 28
    • Joined : Sat Oct 07, 2017 9:40 am
    • Has thanked: 0 time
    • Been thanked:4 times
Here is some information that may be helpful on setting up the Behringer interfaces.
Download & Install Driver Software
After registration, the next step is to download and install the required PC (Windows) driver. A driver isn't necessary on a Mac OS because Behringer interfaces are class compliant and do not need additional software to connect. Follow the steps below to install the required driver software for Windows.
Download & Install Behringer Audio Interface Drivers
1. Visit Behringer's Audio Interface page and select your product.
2. Click the Downloads tab and scroll down to Drivers. Click the latest available driver to start the download.
3. Open your Downloads folder, extract the .zip file, and run the .exe installer. Restart your computer after the installation completes.
Do I need to use the ASIO4All driver?
Although most Behringer audio interfaces have their own driver (version 4.38 as of July 2018), some of the smaller interfaces will require the third-party driver, ASIO4All. These interfaces include the UMC22, UM2, UCA222, and UCA202. Check out our ASIO4All setup guide for instructions on how to install and configure it.
  • Posts: 976
  • Offline
    • Posts : 976
    • Joined : Tue Jul 01, 2014 3:08 pm
    • Has thanked:28 times
    • Been thanked:57 times
I've checked with my contacts and the umc22 does not have an official asio driver from behringer.
You could perhaps try the generic low-latency driver from steinberg to see if that helps...?
Behringer Wing, iMac late 2015, Behringer X-Touch, X-Touch ONE, M-Air mr18, X-Air xr18, x32 with Dante/aes67, x32-rack with Dante/aes67, s16 and sd16 stageboxes, p16 monitor system, TurboSound iQ-speakers, Waves x-wsg with SoundGrid server, Motör 61, BCR-2000, StudioLive 24, FirePod 10, Apogee Ensemble, Alesis HD24, Studio One Pro v5, Notion 6, NI Komplete 11 Ultimate, Halion 6, Nuendo 10, Ableton Live 8 Suite, Reaper 4, misc Line6 gear/software, True Temperament Frets on basses and guitars, Korg Kronos, Roland vk-7, Behringer Deepmind 12, Behringer Neutron, Yamaha 02r.....
  • Posts: 102
  • Offline
    • Posts : 102
    • Joined : Tue Nov 28, 2017 12:03 am
    • Location : Australia
    • Has thanked:24 times
    • Been thanked:13 times
Very dissapointing that any company releases an audio interface with no asio drivers.
If you are running Windows 10, definitely give wasapi driver mode a try if asio4all is unsatisfactory.
Studio One 4 Pro, Win 10, Asus ROG i7, 32 Gb Ram, SSD, RME Fireface UFX, X32, Atom, Faderport USB
  • Posts: 1540
  • Offline
    • Posts : 1540
    • Joined : Tue Jul 01, 2014 1:44 pm
    • Has thanked:1031 times
    • Been thanked:292 times
Try this and see if U can download drivers here : https://www.behringer.com/c/Behringer/D ... rans(en|en)
Moderator
Please add your specs to your SIGNATURE.
Search the STUDIO ONE 4 ONLINE MANUAL. Access your MY.PRESONUS account.
OVERVIEW of how to get your issue fixed or the steps to create a SUPPORT TICKET.
Needs to include: 1) One Sentence Description 2) Expected Results 3) Actual Results 4) Steps to Reproduce.

Windows 10 64bit Home, Mac Catalina, SO4.6.2 Pro, SO 5 Pro, LUNA, Cubase 10.5 Pro, SLIII32, 24.4.2, 16.0.2 FW, Quantum 2626, Faderport 8, Atom, Console 1+Fader 1, UA Apollo Twin TB/USB, Toontrack, NI Komplete 12, ++
  • Posts: 454
  • Offline
    • Posts : 454
    • Joined : Sat Jul 06, 2019 2:00 pm
    • Has thanked:1 time
    • Been thanked:87 times
I had very mixed results with a Behringer UCA222 and ASIO4ALL. It mostly worked except when it occasionally dropped out and needed re-plugging, and the ASIO Control Panel often disagreed with the settings in the DAW and changed on their own. I assumed this latter bit was normal until I got an interface with a 'proper' ASIO driver'. So it's cheap and cheerful and will mostly do the job but will occasionally annoy you! I've no regrets about replacing it with a more pricy Focusrite interface!
Studio One Pro 4, Intel i5-8400 @ 2.8GHz, 32GB RAM, Windows 10 Pro 64-bit
Focusrite Scarlett 8i6 (3rd Gen), Novation Launchkey Mini Mk3, Akai MPK Mini MKII, Novation Remote 25 (ancient, but not as ancient as I am)
Guitars, Mics, Synths, Upright Piano (tuned circa 2005), £50 drum kit, Wife (with Cello and Cello skills)
Page 1 of 1

Behringer Uphoria Um2 Driver Install

Who is online

Um2 Drivers Windows 10 Automatically

Users browsing this forum: risotto and 19 guests





broken image